Adapters

DV4XX Part Numbers:

Each DV4XX adapter part number is followed by an alphabetical list of equipment supported. These adapters (RJ45 on one end and D-sub type on the other) allow the use of network (UTP or CAT5e) cabling with lab equipment. The listed adapter is installed on the equipment end of the cable. The host end is always terminated with a BASE ADAPTER (defined below).

DV405 – 25pin Male

• Coburn Generator ADAPTER, (adapts Coburn supplied cable, see DV040 in “CABLE DIAGRAMS”)
• DVI Null Modem ‘Passive Null’ see DV037 for ‘Active Null’
• Hoya GT-1000 Tracer
• Loh Generator “Lang Black Box to CPU”
• Loh Note: Connector type on earlier Generators are somewhat inconsistent. Verify connector (9/25 M/F) by observation before ordering
• Nidek/Santinelli LE7070 lens edger
• Nidek/Santinelli LT700 lab tracer
• Nidek/Santinelli SE9090 production edge
• P@P Picking Systems Tool Tower Server
• Schneider CCP Robotic Polisher
• Weco Cad 2000 finish blocker
• Weco Cad Blocker / ScanStar or Intermec ‘Host’
• Weco Cad E finish blocker
• Weco Cad finish blocker
• Weco Cad III finish blocker, both modular and solder types tested
• Weco Mini Serial Connected (1114) frame tracer

DV406 – 25pin Male

• AutoFlow Generator
• Gerber Edger 10/90
• Gerber Elite Translator
• Gerber PG5 Pattern Generator
• Gerber Triumph Edger Translator
• Jaser JD73 External
• National Optronics Arcnet Gateway
• National Optronics Frame Tracer -Serial
• National Optronics Lab Server
• National Optronics Saturn Frame Tracer
• National Optronics Helix a/k/a ES Curve (new version 12/10/2010)
• Optek generator
• Straight Extension
• Weco Cad to ScanStar or Intermec 9510
• Briot ACCURA Lab Edger
• Briot Edger
• Briot Tracer Simulator
• Loh AUTO Blocker (robotic surface blocker)-
• Loh CNC Blocker (25 pin, see others)
• Loh ES2/ES3 edger
• Loh PLA Plano Alloy Surface Blocker
• Loh PLW CNC Wax blocker 25 pin, new 12/00, see also 9 pin-
• Loh PRA PRismatic Alloy Surface Blocker
• Loh SL Generator 8/95, see dv031 prior
• Loh V50/V75/V95/V100/VPRO Generator
• Loh VFT Generator (SatisLoh)
• Loh Note: Connector type on earlier Generators are somewhat inconsistent. Verify connector (9/25 M/F) by observation before ordering

DV407 – 25pin Female

• Gerber CAD Blockers: Step-One, Step-Two, using OPTO Isolator
• Gerber Generator; SG8, SGX using OPTO Isolator
• Gerber Lab Server (25 to 25)
• Loh Toromatic SL 11/29/94 see dv406 after 8/95
• National Optronics 6e edger OMA
• PC to PC Lap-Link (Active Null configuration)-

DV408 – 25pin Male

• Gerber FT-5 Frame Tracer 4/10/87
• Loh CNC Blocker 25 pin – PRE 7/95 ONLY … SEE others
• National Optronics 2G Generator
• Roberts Generator 25 pin

DV422 – 9pin Male

• DV426 may be substituted for DV422
• Early Symbol equipment (LS4000 etc) with 25 pin connector used DV402
• Symbol Barcode Equipment (Late- LS42XX) with 9 pin connector

DV424 – 9pin Female

• Coburn IQ generator (Windows 7 or newer)

DV423 – 9pin Female

• Gerber Generator: SG8, SGX Direct to 9pin, NO OPTO Isolator

DV424 – 9pin Female

• Coburn IQ generator 2/93 (For operating systems older than Windows 7)
• Coburn SL2 generator

DV425 – 9pin Male

• Schneider CB BOND Manual Surface Prism Blocker (Alloy)
• Essilor Mr. Blue Edger (might be DV426, depending on generation)
• Essilor Mr. Orange Edger (might be DV426, depending on generation)

DV426 – 9pin Male

• AIT Delta Scan Finish Blocker
• AIT Frame Tracer 10/26/2001 OMA Interfaced
• AIT Maxima Speed Edger
• AIT Opera Drill (Indo)
• AIT Speede Finish blocker
• Briot Scanform Net 2 Tracer
• Essilor Envoy Tracer
• Essilor Kappa Edger or Tracer RS232, no translator
• Essilor Mr. Blue Edger (might be DV425, depending on generation)
• Essilor Mr. Orange Edger (might be DV425, depending on generation)
• Essilor Phi Tracer
• Gerber CLE-100 Edger
• Gerber Envoy Frame tracer
• Gerber RAE frame tracer
• Gerber/Coburn Spartan Edger, no translator
• Gerber/Coburn Titan Edger, no translator
• Kardex Carousel current loop
• National Optronics 4t Frame Tracer
• National Optronics 5t Frame Tracer, AKA Dimension, AKA Surround
• National Optronics Clarity Finish Blocker
• PLM/Coburn 113 conversion
• SatisLoh / LTI G4 Coater

DV427 – 9pin Female

• Automation + Robotics Lens Analyzer
• Coburn IQ Frame Imager
• DAC DSS Generator preliminaries 1/2001
• DAC RXD Lathe Generator-
• E-Lens Drill
• Elision ET300 frame tracer
• Flexlink Conveyor Gate prelim Jan 07
• Foco-Vision Server
• Gerber CAD Blockers: Step-One, Step-Two, NO OPTO Isolator-
• Gerber Gemini Clarifier confirmed 10/2000
• Gerber Gemini Hexapod confirmed 10/2000
• Gerber Lab Server(9 to 25)
• Gerber/Coburn Dimetrix Inspection Blocker
• Gerber/Coburn DTL Surface Generator
• Gerber/Coburn Eclipse Surface Blocker-
• Gerber/Coburn Metrix Lens Analyzer
• Gerber/Coburn Vector generator!! WARNING !! prior to August 2008, use DV428
• Hoya AE3000 edger
• Hoya GT-3000 Frame Tracer-
• Hoya GT-5000 Frame Tracer
• Humphrey’s Lens Analyser NOTE 9 pin M-M gender changer REQUIRED!!!!!!
• Humphrey’s to AT NOTE: 9 pin M-M gender changer REQUIRED !!!!!!
• Huvitz/Coburn Technologies – CFR-4000 Tracer
• Instavision-(9 to 25)
• Key Computer TNT Tracer
• Loh Auto-Flex + I-Flex Polishers via I-Flex Server
• Loh Laserop lens engraver-
• Loh PLW CNC Wax blocker 9 pin, see 25 pin also (12/00)
• Loh TOROX2SL Cylinder Machine Server
• MEI Automazione Edger
• National Optronics 6e edger OMA alternate.. DV407 is preferred
• National Optronics 7e edger
• National Optronics Clarity Blocker/Analyzer
• National Optronics Clarity Lens Analyzer / Blocker
• National Optronics QMX3 Edger
• Nidek/Santinelli AES-1000 Robotic Edger
• Nidek/Santinelli AES-1500 Robotic Edger Drill
• Nidek/Santinelli ICE 900 finish blocker/drill editor
• Nidek/Santinelli ICE 9000 finish blocker
• Nidek/Santinelli ICE 9000
• Nidek/Santinelli ICE-Mini
• Nidek/Santinelli Ice2000 blocker
• Nidek/Santinelli LE9000 edger (retail)
• Nidek/Santinelli LE9000 express
• Nidek/Santinelli LEX 1000 edger
• Nidek/Santinelli LT1000 lab tracer
• Nidek/Santinelli LT900 lab tracer
• Nidek/Santinelli ME-1000 edger / drill
• Optidrill EVO Lens Drill Salem Distributing
• P@P Picking Systems Tool Tower Server .. also see Rocketport connection
• PSI Lens Drill Alphamatic LFC-280
• Sapient to AT work station
• Santinelli 9090 Supra edger
• ScanForm (Briot)
• ScanForm to AT (Briot)
• Schneider CCL C*MARK Laser Engraver
• Schneider CCP SWIFT Polisher (compact manual unit)
• Schneider HSC Generator
• Schneider HSC SPRINT Generator
• Simplimatic Conveyor Controller (may also be 428)
• Topcon ALE-5000xp Edger
• TRACE to T-MUX Concentrator
• Ultra Optics RLC Coater
• Visionix ALB4000 Lens Analyser Blocker (orig mfr of Gerber Dimetrix
• Visionix AV4000 Lens Analyser (orig mfr of Gerber Metrix)
• Visionix VM2500 Freeform Lens Analyzer Inbox (Note dual connections… also requires network access to DVI lab server)
• Weco Edge 990 3 separate oma connections, 2 edgers, one Verifier Pro
• Weco Verifier Pro OMA interface

DV428 – 9pin Female

• Coburn Vector generator!! WARNING !! After Aug 2000, supply DV427
• Gerber Frame Tracer (9 pin)
• Gerber Triumph Frame tracer
• National Optronics Finish Blocker 3B
• OptoTech Surface Auto Blocker
• Simplimatic Conveyor Controller (may also be 427)
• Weco 450 EDGER RS232 (OMA)
• Weco 950 EDGER (OMA)
• Weco CAD 4 (OMA)

DV430 – 9pin Male

• CURRENT LOOP (Weco Edger/Tracer)
• Smart-tech Weco retro fit
• Weco EDGERS (current loop) including but not limited to: Weco CNC90, ZET-90, CNC91, form tracer, 4d EDGER

DV504 – Loop-Back Test Kit – 3 pcs include

• DV030 – D-loop, 9 pin female to 25 pin female, Pins 2+3 looped internally
• DV444 – 9 pin male to rj45, D-connector has pins 2+3 looped, RJ connector has pins 4+5 looped
• DV213 – 25 pin M/M Gender Changer

DV505 – Road Kit

Essential inventory for lab maintenance crew or traveling support staff to handle the unexpected:

• DV405, DV406, DV407, 2)DV408,
• DV426, DV427, 2) DV428,
• DV038-10
• DV504 Loop-Back Test kit, (DV444,DV030,DV213)

Base Adapters

Adapters listed above are for the equipment end of a cable, and are designed to terminate at the computer end with a specific “BASE ADAPTER”, unique to each type of port:

RocketPort 9 pin M	DV428
RocketPort 25 pin F	DV406
PC-AT port 9 pin M	DV428
Digiboard 25 pin M	DV408
PC-Comm Port 25 pin M	DV408

 

Complete Cable Sets

Standard cables can be made by joining 2 modular adapters with a Cat5 cable

 

DV428 + DV427

• 9-Pin Null Modem / LapLink Cable

DV428 + DV425

• ZEBRA Shipping Label Print DA402 (formerly, CoStar or Dymo)
• LAB-TECH FD-80 Frame tracer (Takubo / Dia) prelim Jan 04

DV408 + DV407

• 25-Pin Null Modem / LapLink Cable

DV406+DV428

• ZEBRA S500 Barcode Label Printer RS232 25pin

DV426 + DV428

• ZEBRA S600 Barcode Label Printer RS232 9 pin

DV428+DV426

• NCI Scale to AT Manifest System
• EGA Extension
• Gerber Envoy Tracer to AT
• National Optronics 4t Tracer to AT
• D-Link DES3226 Managed Hub Console to AT

DV405 + DV428

• AT/PC-NULL
• Intermec 9154 Concentrator (MODEM) Host to TRACE AT
• !! Discontinued see DV502 Weco 3D SERIAL Frame tracer ‘AT’ REMO 9 pin
• Hoya GT-1000 Tracer for ‘AT’ Remo 9pin connection
• Loh ‘S’ generator serial 9 pin (at) See cable.doc

DV421 + DV422

• Essilor rs485 connections… see cable.doc

DV406 + DV428

• AT Serial Adaptor
• Hayes Modem-
• Fingers Retro AT To 422 converter-
• Jaser Card to 9 pin serial
• National Optronics Saturn Tracer 9 pin/AT serial

DV408 + DV426

• REVERSE AT Serial Adaptor-
• Mouse adaptor
• CONVERTER: Makes 25 pin ‘PC’ look like a 9 pin ‘AT’ port
• Loh data-distributor adaptor: connect to Loh 9f cable # 23056
• PLM/Coburn 113 conversion-
• National Optronics 4t Frame Tracer
• National Optronics 5t Frame Tracer
• Essilor Kappa Edger or Tracer RS232, no translator
• Gerber/Coburn Titan Edger, no translator
• Gerber/Coburn Spartan Edger, no translator